go to "Configuration" option
close "DCHP"
enter ip address, subnet mask and default gateway.
DNS server is optional.
click "apply" to make it effective
Usually, our IP camereas can support NAS storage。
Please open the update tool first (you can get it from our sales or tech support)
enter the "IP”（for one device） or “IP segment”(more than one device)
select "reset after update"
click "add"
the update tool will connect to device automatically , and show "connect success" then.
5.select the right update file here
6.click "update" directly
7. it will takes several minutes to finish the update, please keep the power on all the time. at last ,you can see the information like this
For most of sunell IP Cameras, the maximum capacity of SD card is 3128GB.
Usually the range of the capacity is 4GB~32GB
If you forget the login password of IP cameras, usually , please contact our tech supports or sales, we will help you to restore the device by updating the firmware.
For some devices, you can press "reset" button to reset to default setting.
Login webpage, and click "reset button" to reset the device. then all the options will back to default value
(except IP address in this situation,because then option "Reserve IP setting" is ON)
the default IP is 192.168.0.120 for IP cameras, you can ping to it in the "CMD"
Please ask the technical supports or sales in Sunell for "IP search Tool" ,it would be useful.
Usually，If you use the IP Cameras for the first time, it will prompt you to install the ActiveX control after you login to web sucessfully .
Before download and isntall it correctly. then reopen the IE broswer to make it to be efficient.
Currently, IPC has 3 ports defaultly: Control Port(30001)、Http Port（80）、RSTP Port（554）
1.click "snapshot" button to get a image
2.you can set the default path here:
1. for normal IPC, right-click on the living video --->click "sensor"--->change to "Debug Mode"---> select "Zoom Focus"
2. For PTZ
click "PTZ" in the main web page, then adjust the focus
Sophia